Whole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Before
After
Before
After
Before
AfterSupply Duct Cleaning in Sandy Springs, GA
Supply duct cleaning removes accumulated debris, dust, and biological growth from the duct runs that carry conditioned air from your HVAC system to each room in your home. In Sandy Springs, most of the homes we work in were built between 1985 and 2010, and the supply ducts in those houses have typically never been cleaned – which means a camera often reveals a quarter-inch to half-inch layer of compacted debris sitting at every elbow and horizontal run. CleanRun Duct Repair & Cleaning has been doing our Air Duct Cleaning services since 2013, with a written price before any panel comes off and a documented photo record of every run when the crew leaves.
If you’re researching this service, you’re probably already skeptical – and you should be. The $79 coupon companies use a shop vac at the register and call it cleaned. We use Rotobrush agitation equipment paired with professional-grade negative-pressure extraction from Abatement Technologies, and we photograph the inside of every supply run before and after so you can see exactly what changed. That’s not a marketing statement; it’s what every job looks like under the Haven Standard.
Questions about your specific system? Call (678) 904-9744 – a live person picks up, and you’ll have a written price before we schedule anything. This page is part of our broader Air Duct Cleaning in Sandy Springs service, and the supply duct work described here is typically quoted and completed as part of that full scope – or as a standalone service when only the supply side needs attention.
What Supply Ducts Actually Do (and Why They Get Dirty)
Your HVAC system has two types of duct runs: return ducts, which pull air back to the air handler, and supply ducts, which push conditioned air out through the registers in your floors, walls, or ceilings. The supply side is where most of the visible contamination ends up, because it carries air under positive pressure directly into your living spaces.
A plenum – the central distribution box attached to your air handler – feeds multiple supply trunk lines, which then branch into individual duct runs leading to each register. Every bend, every horizontal run, and every joint in that path is a place where debris settles. In Sandy Springs specifically, the combination of high summer humidity (routinely above 70% from May through September) and forced-air cooling creates conditions where biological growth – mold, mildew, biofilm – can establish itself in the debris layer. Video Inspection doesn’t lie about what’s there.
When supply runs are partially blocked or coated with debris, the system has to work harder to move the same volume of air. That shows up as uneven temperatures across floors, higher utility bills, and in some cases, visible dust plumes at the registers when the system kicks on. None of those are vague symptoms – they’re measurable, and they have a mechanical cause.
When You Need Supply Duct Cleaning
- Visible dust discharge at supply registers. If you can see a puff of fine dust when the system first cycles on, there is debris in the supply run loose enough to be carried by airflow. This is one of the clearest indicators we see in Sandy Springs homes, particularly in older flex-duct systems where the inner liner has begun to corrugate and trap material.
- Uneven room temperatures across the same floor. A supply run that is partially blocked by debris reduces airflow to that register. Rooms at the far end of a long trunk line are typically the first to show the problem – they’ll run 4 to 6 degrees warmer in summer than rooms closer to the plenum.
- A musty smell when the HVAC runs. Sandy Springs sits in a humid corridor, and debris inside supply ducts holds moisture. When the system runs, air passes over that debris layer and carries the odor into the living space. This is not a filter problem; it’s a duct problem, and a filter change won’t fix it.
- Recent renovation or construction work in the home. Drywall dust, insulation fibers, and wood particulate generated during a remodel travel through the HVAC system if the registers weren’t sealed during the work. Supply runs collect this material quickly, and it packs into the elbows in a way that normal system operation won’t clear.
- No documented cleaning in the past 7 to 10 years. Most Sandy Springs homes we visit have no record of a prior cleaning. If you bought the home between 2015 and 2025 and don’t have documentation from the previous owner, the supply ducts almost certainly haven’t been cleaned during your ownership – and likely not before it either.
- Evidence of rodent or insect activity near ductwork. In the crawlspaces and attic spaces common to Sandy Springs ranch-style and split-level homes, duct runs are accessible to pests. If you’ve had any pest activity in the home, a camera inspection of the supply runs is worth doing before the next cooling season begins.
BeforeAfterOur Supply Duct Cleaning Process
Every job follows the same sequence. There are no shortcuts based on how long the job is taking or how quickly the next appointment is scheduled.
- Written scope and price before work begins. Tomas Reyes or a CleanRun technician walks the system with you, identifies the number of supply runs, notes any flex-duct versus rigid-duct sections, and delivers a written price. Haven Standard Clause 1 is non-negotiable: no work starts without a signed written price. In Sandy Springs, most single-story homes with 10 to 14 supply registers fall into a predictable range – see the pricing section below.
- Pre-cleaning camera inspection and documentation. Before any agitation equipment touches the duct, a camera goes in at the plenum and at each supply register. The footage is saved and becomes part of your job record. This is the “before” that makes the “after” meaningful. We’ve been doing this on every job since 2013 – it’s not an upsell.
- Negative-pressure setup. A high-capacity extraction unit from Abatement Technologies is connected to the main trunk line, creating negative pressure throughout the supply system. This pulls loosened debris toward the extraction point rather than allowing it to redistribute through the duct network. The unit stays running for the duration of the cleaning – not just during the agitation passes.
- Rotobrush agitation through every supply run. A Rotobrush spinning brush is introduced at each register and worked back toward the trunk line. The brush breaks the debris layer from the duct wall; the negative pressure from the extraction unit carries it out. We work every run, not a representative sample. In homes with flex duct – common in Sandy Springs construction from the 1990s – brush speed and pressure are adjusted to avoid inner-liner damage.
- Plenum and trunk line clearing. After the individual runs are cleaned, the plenum and main supply trunk are addressed directly. This is where debris concentrations are typically highest, because all supply runs originate here. The camera goes back in after clearing to confirm the result.
- Post-cleaning camera inspection and photo record delivery. Every run is photographed after cleaning, and the full before-and-after photo record is delivered to you as a standard part of the job – not an optional add-on. You’ll see exactly what was there and exactly what changed. The 365-Day Done Right Promise is also delivered in writing at job close: if it’s not right, CleanRun makes it right, backed in writing, not subject to manager discretion.
Supply Duct Cleaning Pricing in Sandy Springs
How Much Does Air Duct Cleaning Cost? (2026 Price Guide) - Sandy Springs, GA depends on the number of supply runs, the duct material (rigid sheet metal versus flex duct), system accessibility, and whether any runs show evidence of damage or biological growth that requires additional treatment. Every price is written before work begins – there is no “call for a quote” at CleanRun, because Haven Standard Clause 1 means the written price is the whole point.
Below are the typical ranges we quote for Sandy Springs homes. These are real numbers from real jobs, not minimums used to get a truck in the driveway.
- Small home, 8 to 10 supply runs (under 1,800 sq ft): $220 to $310
- Mid-size home, 11 to 16 supply runs (1,800 to 2,800 sq ft): $310 to $430
- Larger home, 17 to 24 supply runs (2,800 to 4,000 sq ft): $430 to $590
- Flex duct add (per run requiring adjusted technique): $8 to $15 per run
- Antimicrobial application to supply side (EPA-registered product, applied after cleaning): $85 to $140 depending on system size
- Combined supply and return duct cleaning (full system): typically $380 to $720 for the same home sizes above
What moves a job toward the higher end of a range: flex duct throughout (more careful technique, longer run times), significant debris build-up requiring multiple agitation passes, attic runs with poor access panels, or biological growth that warrants antimicrobial treatment after mechanical cleaning.
If you have a written estimate from another company, bring it. CleanRun will put its own number next to it in writing at no charge – that’s the Free Second Opinion, and it’s a standing offer on every written estimate we see.
To get a written price for your Sandy Springs home, call (678) 904-9744. The estimate is free, and the price you receive in writing is the price you pay.
What We Find in Sandy Springs Supply Ducts
Because we photograph every job, we have a clear picture of what’s actually inside supply ducts in this market. A few patterns show up consistently:
In Dunwoody-adjacent neighborhoods like Hammond Park and the subdivisions off Roswell Road, we regularly find construction debris in supply runs – drywall compound, primer residue, and insulation fragments – from renovations done without duct protection. These materials pack hard at elbows and significantly reduce airflow to the rooms at the end of those runs.
In the older ranch-style homes around Abernathy Road and the Sandy Springs Historic District, the original galvanized steel supply ducts are often in good structural shape but carry 20 to 30 years of dust accumulation at every horizontal section. The debris layer in these systems tends to be dense and dry, which responds well to Rotobrush agitation.
In newer construction in Perimeter Center and near the City Springs development, the issue is usually flex duct installed with excessive bends – sometimes 90-degree folds where a gradual curve should be. The inner liner in those sections traps debris because airflow is already turbulent at the bend. Cleaning helps, but in some cases we’ll flag that the duct routing itself is the underlying issue and document that in the job record.
We also see a consistent pattern in homes that have had prior low-price “cleanings”: the registers are clean, the plenum collar looks touched, but the camera shows that the middle sections of every supply run are untouched. That’s what shop-vac noise produces. It looks and sounds like work, but the documentation tells the actual story.
Supply Duct Cleaning vs. Full Air Duct Cleaning: What’s the Difference?
A full Air Duct Cleaning in Sandy Springs covers both the supply side and the return side of your system – including return runs, the return plenum, and in many cases the air handler cabinet and blower assembly. Supply duct cleaning addresses only the ducts that deliver conditioned air to the living spaces.
For most homes where the return side is in reasonable condition and the primary issue is airflow restriction or register-level contamination, supply-only cleaning is a practical and cost-effective scope. We’ll tell you in writing, before work starts, whether we see evidence on the return side that warrants expanding the scope. If we don’t see it, we won’t quote it.
In Sandy Springs homes with two HVAC systems – a common configuration in the split-level and two-story homes north of I-285 – the supply duct networks for each system are typically quoted separately, because access points and run counts vary significantly between floors.
FAQs – Supply Duct Cleaning in Sandy Springs
How much does supply duct cleaning cost in Sandy Springs?
Supply duct cleaning in Sandy Springs typically costs $220 to $590 for a single-system home, depending on the number of supply runs, duct material, and condition. Most mid-size homes with 11 to 16 supply runs fall between $310 and $430. Every CleanRun job is quoted with a written price before work starts – that number is in the pricing table above, and it reflects what we actually charge on real jobs in this market. Call (678) 904-9744 for a free written estimate for your home.
How long does supply duct cleaning take in a typical Sandy Springs home?
Supply duct cleaning on a typical Sandy Springs home with 10 to 16 supply runs takes between 2.5 and 4 hours from setup to final camera documentation. Larger homes, systems with significant debris build-up, or configurations with difficult attic access can extend that to 5 to 6 hours. We don’t rush the agitation passes to hit a schedule – the post-cleaning camera documents whether the run is actually clear, and that’s a hard stop before the job closes.
Can supply duct cleaning make a noticeable difference in airflow?
Yes, when there is a meaningful debris load in the runs. In homes where supply runs have a visible debris layer at the elbows and horizontal sections – which the pre-cleaning camera documents – customers consistently report improved airflow at affected registers after cleaning. In Sandy Springs homes with long supply runs to second-floor or far-end rooms, the difference is often measurable as a 2 to 4 degree improvement in room temperature consistency. If the camera shows relatively clean runs before we start, we’ll tell you that in writing too – because a cleaning that doesn’t change the documented condition isn’t something we’d charge you for.
Do I need to clean supply and return ducts at the same time?
Not always. Supply-only cleaning is a valid scope when the return side is documented as clean on camera and the primary issue is on the supply side. CleanRun will inspect and photograph both sides during the initial walkthrough and give you a written recommendation for each. If the return ducts are in good condition, quoting return cleaning alongside it would be adding cost without a documented reason – and that’s not how we work. If both sides need attention, the combined scope is typically more cost-efficient than scheduling two separate visits.
The 365-Day Done Right Promise on Supply Duct Work
Every supply duct cleaning CleanRun performs in Sandy Springs is covered by the 365-Day Done Right Promise. If the work isn’t right – if a run wasn’t fully cleaned, if the photo record shows something that should have been addressed and wasn’t, if the result doesn’t hold up – CleanRun comes back and makes it right. That commitment is delivered in writing at the close of every job, not stated verbally and forgotten. It applies to every run on every job, without a manager-approval process.
Tomas Reyes established this standard in 2013, and it’s been on every job since. In over 52,000 homes served, the written guarantee has always been the same document the customer received at close – not a revised version if something needed to be fixed.
Key Takeaways
- Supply duct cleaning removes debris from the runs that deliver conditioned air to your rooms – a different scope from return duct cleaning, though often done together.
- In Sandy Springs, the combination of high humidity and older flex-duct construction creates consistent debris and moisture conditions in supply runs that a camera documents clearly.
- CleanRun prices supply duct cleaning at $220 to $590 depending on system size, with every price in writing before work starts.
- Every job includes a pre-cleaning and post-cleaning camera record of every supply run – delivered to you as a standard part of the job, not an add-on.
- The 365-Day Done Right Promise covers every supply run on every job, in writing.
- Professional-grade Rotobrush agitation equipment and Abatement Technologies negative-pressure extraction are the tools used on every job – not a shop vac.
Schedule Your Supply Duct Cleaning in Sandy Springs
If your Sandy Springs home has supply runs that haven’t been documented clean in the past 7 years, searching for Air Duct Cleaning Near Me in Sandy Springs, GA to get a camera inspection is where this starts. CleanRun will photograph what’s there before any work begins and give you a written price based on what we actually find. There is no estimate that turns into a different number once the panels are off.
Call (678) 904-9744 to schedule. A live person answers every call. Tomas Reyes and the CleanRun team serve Sandy Springs and the surrounding metro area, and the written price you receive before the job starts is the number on the invoice when it ends.
Written by Tomas Reyes, Owner at CleanRun Air Duct Cleaning Sandy Springs, serving Sandy Springs.