Whole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Before
After
Before
After
Before
AfterNikro HVAC Cleaning in Sandy Springs: What to Know First
CleanRun Air Duct Cleaning Sandy Springs provides independent Nikro HVAC cleaning for homeowners across Sandy Springs, from the Spalding Drive corridor to the newer builds near City Springs. Most Nikro evaporator coil and blower cleaning jobs are completed in a single scheduled visit, with a written price delivered before any panel comes off. Typical whole-system HVAC cleaning runs $340-$620 for Sandy Springs homes, depending on system accessibility and whether the plenum (the main distribution box above your air handler) requires separate attention.
This page is for Nikro owners who want the work done without upsell fog: documented photos, plain-language findings, and a price that doesn’t change once the truck is in the driveway. Call (678) 904-9744 for a free written estimate, or bring a competitor’s quote for our free second opinion under Haven Standard Clause 1.
How Nikro Products Fail - and How We Fix Them
- PSC Series blower motors seize from dust compaction. The PSC (Permanent Split Capacitor) line uses open-frame motors that pull return air directly across the windings. In Sandy Springs, where pollen season runs March through May and Georgia clay dust infiltrates crawl spaces, we’ve found blower cages packed to 1/4-inch depth with debris that the homeowner never sees. We remove the entire blower assembly, clean the cage and motor housing with negative-pressure extraction (suction that contains the mess instead of blowing it into your living space), and photograph the windings before reassembly. If the motor draws over 15% above nameplate amperage, we flag it in writing.
- UV Series evaporator coils develop biofilm between fin rows. Nikro’s UV line pairs ultraviolet lamps with coated coils, but the coating degrades faster in high-humidity crawl spaces common in Sandy Springs ranch homes built 1965-1985. The lamps continue running; the coil stops shedding condensate properly. We document fin corrosion with borescope photos, apply manufacturer-compatible foaming cleaner, and treat with a non-acidic coil treatment that won’t void remaining warranty coverage. The photo comes first. The invoice comes second.
- Flex Series heat exchangers accumulate soot at burner offset. Nikro’s Flex Series uses induced-draft burners with tight tolerances. When the induced-draft blower wheel loads with dust, combustion air drops and incomplete burning deposits carbon on the heat exchanger face. We pull and photograph the burner assembly, measure draft pressure with a digital manometer, and clean the exchanger tubes with rotary brushes sized to Nikro’s tube diameter - not generic oversize tools that scar the metal.
- ProVac line condenser coils clog with cottonwood and oak tassel. Sandy Springs has dense mature oak canopy, and May through June drops enough pollen and seed debris to mat Nikro’s tight-fin ProVac condensers. We use low-pressure foaming wash (never high-pressure, which folds fins) and straighten damaged fins with a comb matched to Nikro’s 8 fins-per-inch specification. We also check the contactor and capacitor while the panel is off, since ProVac units run hard through Georgia summers.
- Air handler cabinets in the Classic line trap moisture at the drain pan interface. Nikro’s Classic series uses a galvanized pan with a single drain port. When the port gums with algae, water backs into the fiberglass cabinet liner. We clean the pan with enzymatic treatment, rod the drain line to the exterior, and photograph the cabinet floor for rust or delamination. If the pan is cracked, we source the Nikro OEM pan or a certified aftermarket equivalent - we don’t silicone over a structural failure.
Our Nikro HVAC Cleaning Process
- 1
Scheduled arrival, named technician. You get the technician’s name and photo before arrival under Haven Standard Clause 3: Verified Crews. No random subcontractor.
- 2
System shutoff and photo baseline. We photograph the unit nameplate, filter condition, and any visible corrosion before touching a tool. This becomes page one of your job record.
- 3
Diagnostic disassembly with parts assessment. We identify whether your component needs Nikro OEM parts, quality aftermarket equivalents, or simple cleaning. We write the scope and price before proceeding.
- 4
Negative-pressure cleaning and component service. Coils, blowers, burners, or condensers are cleaned with equipment matched to the component - Rotobrush rotary systems for duct runs, Nikro-compatible foaming agents for coils, Guardsman treatments where sanitizing is requested.
- 5
Reassembly, operational test, and photo record delivery. We run the system through a complete cycle, measure temperature split and static pressure, and deliver your before-and-after photo record as a standard deliverable - not an upsell.
- 6
Written 365-Day Done Right Promise. The guarantee is printed, signed, and left with you. If the work isn’t right, we make it right. No manager approval required.
BeforeAfterWhat Nikro HVAC Cleaning Costs in Sandy Springs
| Service | Typical Range | What Moves the Price |
|---|---|---|
| Evaporator coil cleaning (accessible attic) | $280-$420 | Coil condition, fin corrosion level, whether plenum access requires cutting |
| Blower motor and cage cleaning | $220-$340 | Motor amp draw, cage removal difficulty, bearing condition |
| Condenser coil cleaning (outdoor unit) | $180-$280 | Fin damage, debris depth, refrigerant access valve condition |
| Heat exchanger cleaning | $320-$480 | Soot depth, burner removal complexity, draft test results |
| Full air handler service (coil + blower + pan + cabinet) | $480-$620 | System age, accessibility, parts replacement needs |
| Whole-system HVAC cleaning (indoor + outdoor) | $580-$840 | Dual-zone systems, hard-piped vs. flex duct connections |
Every price is written and agreed before work starts. No per-vent add-ons, no “while we’re here” surprises. Sandy Springs homes with crawl space air handlers typically run toward the higher end due to limited access; slab-on-grade units with attic ductwork are usually simpler. Call (678) 904-9744 for your exact written estimate - estimates are free, and we honor our free second opinion on any competitor’s written quote.
Why Sandy Springs Homeowners Call CleanRun Air Duct Cleaning Sandy Springs for Nikro Work
We’ve been working Sandy Springs since 2013, including the older ranch inventory off Spalding Drive where ductwork and air handlers haven’t been touched in decades. Tomas Reyes and our crew know the difference between a Nikro PSC blower and a Flex Series heat exchanger because we’ve cleaned both, documented both, and warrantied both.
Our equipment roster includes Nikro-compatible tools alongside Rotobrush, Abatement Technologies, Honeywell, Aprilaire, and Guardsman systems - brands you can verify independently. We’re also experienced with Lennox, Trane, and Carrier equipment for homes with mixed-brand setups. Every technician is background-checked and uniformed. Every job carries the 365-Day Done Right Promise in writing. And every customer receives the Documented Photo Record of every duct run and component cleaned, included as standard, not sold as extra.
We’re an independent Nikro service provider - not affiliated with or authorized by Nikro Manufacturing - which means our recommendations are based on what we find, not on manufacturer script.
FAQs
No, routine cleaning by a qualified technician does not void your Nikro warranty, provided no components are altered or damaged during service. We document our methods and use manufacturer-compatible cleaning agents, not caustic acids or high-pressure water that can degrade coil coatings. If your system is still under warranty, we note coverage status in your written scope and flag any findings that should be handled under Nikro’s parts program. Call (678) 904-9744 if you’d like us to review your warranty paperwork before scheduling.
We answer this with the borescope and the amp meter, not a sales pitch. If the coil is dirty but intact, cleaning restores performance. If the blower motor draws excessive amperage after cleaning, or if the heat exchanger shows cracks or rust-through, we photograph the finding and write a separate repair scope with its own price. You see what we see before deciding. Our free second opinion applies to repair estimates too - bring us another company’s repair quote and we’ll put our assessment next to it in writing.
We source Nikro OEM parts through authorized distributors for components still in production. For discontinued Classic series parts, we use quality aftermarket equivalents that meet or exceed OEM specifications, and we tell you which we’re installing before the work proceeds. We don’t substitute without written acknowledgment - that’s Haven Standard Clause 1.
Every 3-5 years for the evaporator coil and blower in typical residential use. Sandy Springs homeowners with pets, recent renovation dust, or homes under mature oak canopy should consider every 2-3 years for condenser coils. We don’t sell maintenance contracts or automated scheduling - we photograph the system condition and tell you when the next cleaning is likely to matter based on what we found. Call (678) 904-9744 after your job and we’ll note your file for a courtesy reminder, no obligation.
Duct cleaning addresses the distribution network - the metal or flex runs that carry air to your registers. HVAC cleaning targets the mechanical components that condition that air: evaporator coil, blower, heat exchanger, condenser, and air handler cabinet. A Nikro system can have clean ducts and a fouled coil, or vice versa. We assess both separately and scope only what needs attention, with separate written prices for each. Many Sandy Springs homeowners start with one and add the other once they see the photo record.
Ready for a written estimate? Call (678) 904-9744 to speak with a live person - no phone tree - and we’ll schedule your free Nikro HVAC cleaning assessment in Sandy Springs. Bring a competitor’s written quote for our free second opinion, or start fresh with a scope and price you can hold in your hand before any work begins.
Written by Tomas Reyes, Owner, CleanRun Air Duct Cleaning Sandy Springs at CleanRun Air Duct Cleaning Sandy Springs, serving Sandy Springs and nearby areas.