Whole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Before
After
Before
After
Before
AfterHoneywell Duct Repair & Sealing in Sandy Springs: What to Know First
As an independent Honeywell service provider, we repair and seal Honeywell-connected duct systems in Sandy Springs homes for a flat, written price agreed before any work starts. Most Honeywell duct jobs finish in one visit, with your photo record delivered before we leave. You’ll know the exact cost after our inspection, not after the truck is in your driveway. If you own a Honeywell whole-home dehumidifier, ERV, or air cleaner integrated with your ductwork and you’ve noticed uneven temperatures, rising energy bills, or musty airflow, this page is for you. Call (678) 904-9744 for a free written estimate.
How Honeywell Products Fail - and How We Fix Them
- TrueDRY DR90/DR120 dehumidifier duct collars crack at the flex connection. The plastic collar on these units fatigues after 5-7 years of Atlanta’s thermal cycling, especially in Sandy Springs attics that hit 140°F in July. We replace with a metalized transition collar and seal with mastic, not foil tape, because tape degrades in that heat.
- TrueFRESH ERV150/ERV200 intake ducts pull loose from their wall penetrations. The constant low-speed blower creates micro-vibration that loosens flex duct clamps. We find this regularly in Spalding Drive corridor ranches where the ERV was retrofitted into 1970s framing. Our fix: rigid metal stub-outs with vibration-isolating canvas connectors.
- FC100A and FC200A media cabinet gaskets compress and leak bypass air. After three filter changes, the foam gasket loses its seal. Bypass air means unfiltered attic air enters your supply. We measure the gap, replace with closed-cell neoprene gasket, and pressure-test after.
- Whole-house humidifier bypass ducts rot at the plenum tap. The HE150, HE200, and HE300 series use a 6-inch round bypass that collects condensate in Sandy Springs shoulder seasons when dew points swing 30 degrees in a day. We cut back to sound metal, install a drainable drip leg, and seal with water-rated mastic.
- F100 and F200 electronic air cleaner duct transitions leak at the cell guides. The sheet-metal shrouds on these cabinets flex when cells are removed for cleaning, breaking the seal. We spot-weld stress points and apply two-part duct sealant rated for the pressure differential these units see.
Our Honeywell Duct Repair & Sealing Process
- 1
Photo inspection before equipment moves. We snake a camera through every duct run connected to your Honeywell component. You see the image before we name the problem.
- 2
Written scope and flat price. Haven Standard Clause 1: the price is written, itemized, and signed before a panel comes off. No per-vent math, no surprise add-ons.
- 3
OEM or verified aftermarket parts decision. For Honeywell-specific components like ERV collars or humidifier bypass kits, we stock OEM. For generic duct repairs, we use quality aftermarket that meets the same pressure and temperature specs, and we tell you which before ordering.
- 4
Repair and seal with trade-grade methods. Mastic on every seam, mechanical fasteners on every joint, insulation restored to R-6 minimum. We photograph each stage.
- 5
Pressure test and airflow verification. We measure static pressure before and after, and run a smoke pencil on every sealed joint. The numbers go in your job record.
- 6
Documented Photo Record delivery and 365-Day Done Right Promise activation. Every before-and-after image, every pressure reading, every product label - yours in writing, backed by Haven Standard Clause 5.
BeforeAfterWhat Honeywell Duct Repair & Sealing Costs in Sandy Springs
These are real ranges from our written estimates in Sandy Springs, not teaser prices that change on arrival:
| Service | Typical Range |
| Single flex duct repair/replace (one run) | $280 - $450 |
| Honeywell dehumidifier/ERV collar replacement + seal | $340 - $520 |
| Whole-system mastic sealing (average 2,400 sq ft home) | $1,800 - $2,600 |
| Media cabinet gasket replacement + pressure test | $180 - $290 |
| Humidifier bypass duct rebuild with drip leg | $420 - $650 |
What moves the price: accessibility (crawl space vs. attic), duct material (flex vs. rigid metal), and whether the Honeywell component must be temporarily disconnected. We also service Lennox, Trane, and Carrier systems with the same flat-price structure. Call (678) 904-9744 for your exact written estimate - estimates are free.
Why Sandy Springs Homeowners Call CleanRun Air Duct Cleaning Sandy Springs for Honeywell Work
The photo comes first. The invoice comes second.
Since 2013, we’ve served 52,000+ homes with one rule: show what you found before you say what it costs. Tomas Reyes and our crew know Honeywell’s product line because we’ve documented repairs on hundreds of them in Sandy Springs alone, including the aging TrueDRY units in the Ridgeview Park area and the ERV retrofits along Spalding Drive. Every technician is background-checked and uniformed under Haven Standard Clause 3: Verified Crews. You get a written price, a photo record of every duct run, and the 365-Day Done Right Promise in writing - not a policy, a contract term. If you have a competitor’s estimate, we’ll put our number next to it for free.
FAQs
No, independent duct repair does not void Honeywell’s product warranty, provided the work doesn’t alter the unit’s electrical or control components. We document our scope with photos to prove the product itself was untouched. For questions about your specific Honeywell model, call (678) 904-9744 and we’ll review the warranty language with you before scheduling.
We stock OEM collars, gaskets, and transition kits for current Honeywell models. For discontinued lines like the early TrueDRY series, we fabricate equivalent solutions from code-rated materials and document the substitution in your job record. You’ll see the part label before it goes in.
Replace when the ductwork has multiple failure points, asbestos-containing material, or sagging flex that has crushed the inner liner. Repair when the damage is localized and the remaining ductwork tests tight. We pressure-test the full system and show you the numbers. Call (678) 904-9744 for the inspection.
Most single-component repairs finish in 2-4 hours. Whole-system sealing on a larger Sandy Springs home takes a full day. We quote the time estimate in writing with the price, and we don’t leave until the pressure test passes.
The $79 coupon model relies on arriving at your door and finding “problems” that multiply the bill. We don’t do that. Haven Standard Clause 1 requires a written, flat price before work starts. Our photo record proves what was actually done inside your ducts. If a competitor won’t put their full price in writing upfront, ask yourself what changes once they’re in your home.
Written by Tomas Reyes, Owner, CleanRun Air Duct Cleaning Sandy Springs at CleanRun Air Duct Cleaning Sandy Springs, serving Sandy Springs and nearby areas.