Whole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Before
After
Before
After
Before
AfterAir Duct Cleaning in Sandy Springs, GA
HVAC cleaning in Sandy Springs typically runs $400-$850 for a whole-system service, with most homes in the 1960s-1980s ranch and split-level stock needing coil and blower attention alongside ductwork due to decades of accumulated debris in original fiberglass duct board. CleanRun crews treat Sandy Springs as a distinct market from newer north-metro suburbs because the housing stock here fails differently: duct board delaminates, flexible ductwork collapses at elbows, and pollen loads from Georgia’s extended spring season compound the problem year after year. Call (678) 904-9744 for a written estimate before any work begins.
Why Sandy Springs Homes Are Different
Sandy Springs’s residential core was built out largely in the 1960s through 1980s during its decades as unincorporated Fulton County, leaving a dense concentration of homes with original fiberglass duct board and early flexible ductwork now 40-50 years old - material that crumbles and sheds fibers in Georgia’s sustained humidity far faster than modern duct systems. This aging stock, combined with metro Atlanta’s notoriously heavy spring pollen load funneled through HVAC systems that run almost year-round, makes duct contamination a baseline condition rather than an exception in large swaths of the city.
Technicians working the older interior neighborhoods near Hammond Drive and Roswell Road frequently open duct panels to find duct board lining that has begun delaminating - sending fiberglass particles and decades of compacted debris directly into living spaces - a failure mode that is largely absent in the newer construction of Alpharetta or Johns Creek just a few exits north on GA-400. The Chattahoochee River along the western boundary creates localized elevated humidity in adjacent neighborhoods, raising mold colonization risk inside older duct systems there. Perimeter Center’s high-rise condominiums and mixed-use towers add a separate inventory with commercial-grade air-handling systems requiring different equipment and access approaches than single-family residential work.
Our Main Sandy Springs Services
Homeowners in Sandy Springs most often call CleanRun for deep HVAC system cleaning and documented air quality improvement. Three additional services have dedicated Sandy Springs pages with full local detail:
Air Duct Cleaning in Sandy Springs
Our full duct cleaning service covers every duct run, register, and return in Sandy Springs homes, with particular attention to the collapsed flexible ductwork and delaminating duct board common in pre-1990 construction near Hammond Drive and Roswell Road. Every job includes a Documented Photo Record of each run before and after, delivered as part of the standard job record. Air Duct Cleaning in Sandy Springs covers residential pricing, what the photo record shows, and how we access systems in older ranch and split-level layouts.
Dryer Vent Cleaning in Sandy Springs
Dryer vent blockages in Sandy Springs often involve longer vent runs through crawlspaces or attics in 1970s-1980s homes, where flexible transition ducting has sagged or trapped lint in low points. We clean the full vent path from dryer to termination, photograph the obstruction, and measure airflow before and after. Dryer Vent Cleaning in Sandy Springs has full pricing and safety details.
Duct Repair & Sealing in Sandy Springs
When duct board has delaminated or flexible ductwork has torn at elbows, cleaning alone is not enough. We repair or replace damaged sections, seal connections with mastic, and pressure-test the system to verify integrity. Duct Repair & Sealing in Sandy Springs explains when repair follows cleaning and when it replaces it entirely.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterHVAC Cleaning in Sandy Springs
HVAC cleaning in Sandy Springs addresses the entire air-handling system, not just the ducts, because the evaporator coil, blower assembly, and condenser unit in 40-50-year-old systems accumulate debris that restricts airflow and harbors microbial growth in Georgia’s humid climate. CleanRun’s HVAC Cleaning service is built for this housing stock: we photograph each component before and after, deliver a written scope and price before touching equipment, and back the work with the 365-Day Done Right Promise.
Evaporator Coil Cleaning
Signs you need it
Ice buildup on refrigerant lines, weak airflow from registers, or musty odors when the AC cycles on in Sandy Springs homes with original coils from the 1970s-1990s.
What it costs in Sandy Springs
Evaporator coil cleaning in Sandy Springs typically ranges from $250-$450 depending on accessibility and contamination level.
How we do it
We access the coil through the plenum (the main air distribution box), apply foaming cleaner from Abatement Technologies, rinse with low-pressure water, and photograph the fin surface before and after.
Blower Cleaning
Signs you need it
Visible dust puffing from registers at startup, uneven heating or cooling between rooms, or blower motor straining in older Sandy Springs systems that have never had the assembly removed.
What it costs in Sandy Springs
Blower cleaning in Sandy Springs typically ranges from $180-$320 for standard residential units, with complex multi-speed motors at the higher end.
How we do it
We remove the blower assembly, clean the squirrel cage and housing with compressed air and contact cleaner, balance the fan, and reinstall with a photographed before-and-after record.
What HVAC Cleaning Costs in Sandy Springs
| Item | Typical range in Sandy Springs |
|---|---|
| Evaporator coil cleaning | $250-$450 |
| Blower cleaning | $180-$320 |
| Full HVAC system cleaning (coil + blower + ducts) | $650-$1,100 |
How do I know the HVAC cleaning was actually done?
CleanRun delivers a Documented Photo Record of every component - coil, blower, and duct runs - before and after, with timestamps on each image; if the crew cannot show you what was inside your system, the work is not verifiable. Call (678) 904-9744 to schedule and receive your written scope and price before any work starts.
How often should HVAC cleaning happen in Sandy Springs?
Homes with original 1960s-1980s duct board and Georgia’s year-round pollen load typically need full HVAC cleaning every 3-5 years, with coil inspection every 2 years; newer construction with sealed ductwork can extend to 5-7 years. Call (678) 904-9744 and we’ll assess your system age and condition in person.
Air Quality & Sanitizing in Sandy Springs
Air quality and sanitizing in Sandy Springs targets the microbial load that thrives in 40-50-year-old duct systems during Georgia’s extended humid season, when the Chattahoochee River corridor elevates local humidity and original fiberglass duct board provides a porous surface for mold and bacteria colonization. CleanRun’s Air Quality & Sanitizing service applies EPA-registered treatments with documented application records, not fog-and-hope methods.
Mold Treatment
Signs you need it
Visible mold on register surfaces, musty odors that persist after cleaning, or allergy symptoms that worsen when the HVAC runs in river-adjacent Sandy Springs neighborhoods with elevated ground-level humidity.
What it costs in Sandy Springs
Mold treatment in Sandy Springs typically ranges from $350-$600 for localized application, with whole-system treatment for extensive colonization reaching $800-$1,200.
How we do it
We apply Guardsman EPA-registered mold treatment directly to affected duct surfaces using controlled application wands, not broadcast fogging, and photograph each treated run for the job record.
UV Light Installation
Signs you need it
Recurring mold or biofilm after professional cleaning, or chronic musty odors in systems with persistent moisture due to Sandy Springs’s humid climate and aging drain pans.
What it costs in Sandy Springs
UV light installation in Sandy Springs typically ranges from $400-$750 for a single-lamp system with professional mounting and electrical connection.
How we do it
We mount a UV-C lamp in the supply plenum with a sight glass for homeowner verification, wire to a dedicated circuit, and document lamp model and installation position in the written job record.
What Air Quality & Sanitizing Costs in Sandy Springs
| Item | Typical range in Sandy Springs |
|---|---|
| Mold treatment (localized) | $350-$600 |
| Mold treatment (whole-system) | $800-$1,200 |
| UV light installation | $400-$750 |
Is mold treatment safe for my family?
CleanRun uses only EPA-registered products applied to duct surfaces with controlled wands, not airborne fogging; the system is ventilated before reoccupancy and the product label is included in your written job record. Call (678) 904-9744 for product-specific documentation before scheduling.
Does UV light actually prevent mold in Sandy Springs’s humidity?
UV-C lamps inhibit mold and bacterial growth on the coil and in the plenum when properly positioned and maintained, but they do not clean existing debris; we recommend UV installation only after thorough HVAC cleaning, with lamp replacement every 12-14 months. Call (678) 904-9744 for a written assessment of whether UV makes sense for your system age and condition.
Brands We Service in Sandy Springs
CleanRun stocks parts and performs documented cleaning and repair on systems from Aprilaire, Honeywell, Rotobrush, Abatement Technologies, and Guardsman, with most replacement components available through our Atlanta-area supply chain for next-day turnaround. See our brands for the full equipment roster and compatibility notes.
Pricing for Air Duct Cleaning in Sandy Springs, GA
| Service | Typical range in Sandy Springs |
|---|---|
| Air duct cleaning (whole system) | $400-$750 |
| Dryer vent cleaning | $150-$275 |
| Evaporator coil cleaning | $250-$450 |
| Blower cleaning | $180-$320 |
| Condenser cleaning | $120-$220 |
| Air handler cleaning | $200-$380 |
| Mold treatment (localized) | $350-$600 |
| Mold treatment (whole-system) | $800-$1,200 |
| UV light installation | $400-$750 |
| Full HVAC system cleaning | $650-$1,100 |
Prices in Sandy Springs run higher for homes with original 1960s-1980s duct board that requires careful handling, for systems with limited attic or crawlspace access, and for river-adjacent properties with advanced mold colonization. Every CleanRun job starts with a written price under Haven Standard Clause 1 - no exceptions, no post-arrival adjustments.
Neighborhoods We Serve in Sandy Springs
CleanRun crews work throughout Sandy Springs with dispatch coordinated from our Atlanta office; most appointments are scheduled within a few business days based on route density, not neighborhood hierarchy.
- Hammond Hills and the Hammond Drive corridor
- Riverside neighborhoods along the Chattahoochee
- Perimeter Center and surrounding condominium towers
- Dunwoody Panhandle and Spalding Drive area
- North Springs and the GA-400 corridor
Service Area - Cities Near Sandy Springs
CleanRun’s metro Atlanta coverage extends to homeowners in Roswell, GA, with its newer construction and different duct failure patterns; Norcross, GA, where Gwinnett County building codes created distinct installation standards; Smyrna, GA, with its own concentration of 1970s-1980s housing stock; and Marietta, GA, where Cobb County’s varied topography affects HVAC runtime and duct wear. Each city page has local pricing and condition-specific guidance.
Serving Sandy Springs, GA - Our Local Coverage Area
We’re based in the Sandy Springs area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Air Duct Cleaning in Sandy Springs
Sandy Springs requires permits for duct modification and new installation but not for cleaning or sanitizing existing systems; our crew carries documentation of the work scope for HOA or property manager review when requested. If your project involves duct replacement or routing changes, we handle permit research as part of the written scope.
Most Sandy Springs appointments are scheduled within 3-5 business days based on route density and job complexity; emergency mold or system-failure situations receive priority assessment. Call (678) 904-9744 for current availability and a written estimate.
Yes, CleanRun works with Perimeter Center condominium associations and building management on commercial-grade air-handling systems, though access protocols, parking, and equipment staging differ from single-family residential work; we coordinate directly with your building engineer for rooftop or mechanical-room access.
What happens when you call
- 1A real person answersNo phone trees - talk to a local air duct cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Sandy Springs Customers Say
"The before and after photographs of each run are the reason I used them. You cannot argue with what came out of the return."
- Marguerite O."Thorough job on the ducts and the dryer vent. Left the house clean and the paperwork was clear."
- Rafael I."They found a disconnected duct in the crawl space that had been dumping conditioned air under the house for years. Photographed it, quoted the repair, fixed it."
- Devon A.