Whole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Before
After
Before
After
Before
AfterAbatement Technologies Air Duct Cleaning in Sandy Springs: What to Know First
We provide independent Abatement Technologies air duct cleaning in Sandy Springs with a written price delivered before any work starts and a documented photo record of every duct run before we leave. Most residential Abatement Technologies systems we service in Sandy Springs are completed in a single scheduled visit, with the full scope agreed in writing under Haven Standard Clause 1. Typical whole-system cleaning for Abatement Technologies residential units in this market runs $450-$890 depending on system size and accessibility.
This page is for Sandy Springs homeowners who own an Abatement Technologies air filtration or HVAC accessory system and need to know whether their ductwork can be cleaned without voiding warranties, what the work actually involves, and what it costs before a technician arrives. If that describes your situation, call us at (678) 904-9744 for a free written estimate.
How Abatement Technologies Products Fail - and How We Fix Them
- Abatement Technologies PREDATOR 800 Series portable air scrubbers: These units are common in Sandy Springs renovation jobs and older homes near the Chattahoochee River where humidity stays elevated through October. The pleated pre-filters load with construction dust and Georgia pollen faster than the pressure gauge suggests, causing the HEPA stage to work harder and the blower motor to draw excess amperage. We photograph the filter loading before removal and measure static pressure across the HEPA bank to determine whether the unit needs deep cleaning or component replacement.
- Abatement Technologies HEPA-AIRE SAH2 Series whole-house systems: The bypass damper on early SAH2 units (pre-2019) sticks in partial-open position after years of Sandy Springs pollen accumulation, creating a pressure imbalance that pulls unfiltered attic air through gaps in the return plenum. Our camera inspection targets the damper actuator first; if the servo is functional, we clean the linkage and document the full range of motion before reassembly.
- Abatement Technologies PAS2400 portable units: The 12-inch intake hose develops fatigue cracks at the swivel fitting where Sandy Springs homeowners repeatedly route it around basement corners and crawlspace openings. We inspect the hose interior with a borescope because debris accumulation at the crack site accelerates the split, then replace with Abatement Technologies OEM hose or a Guardsman-rated equivalent depending on availability and your preference.
- Abatement Technologies CAP600-UV commercial ceiling mounts: Found in several Sandy Springs medical office conversions along Roswell Road, these units suffer UVC lamp degradation that the control board doesn’t always flag. We meter actual UVC output at the lamp surface and compare to manufacturer spec; if output has dropped below 70% of rated microwatts per square centimeter, we replace the lamp and clean the reflective aluminum interior, documenting both readings in your job record.
- Abatement Technologies HEPA-AIRE Guardian negative air machines: The rubber isolation mounts on the blower housing compress after 4-6 years in Georgia’s heat-cool cycles, transferring vibration to the cabinet and creating noise complaints in Sandy Springs townhomes with shared walls. We measure vibration in three axes, replace mounts with matched durometer parts, and verify isolation before the unit returns to service.
Our Abatement Technologies Air Duct Cleaning Process
- 1
Call and scheduling. A live person answers, confirms your Abatement Technologies model if you know it, and schedules a technician arrival window. No automated queue.
- 2
Arrival and system identification. Our technician confirms the exact Abatement Technologies unit by model and serial, then pulls the first inspection photo before touching equipment. Tomas Reyes started this practice after jobs in the Spalding Drive corridor revealed ductwork untouched since the 1970s.
- 3
Written scope and price. We deliver a written price before any panel comes off, referencing Haven Standard Clause 1. The scope names every duct run to be cleaned, every filter to be replaced, and every test to be performed.
- 4
Negative-pressure extraction with Abatement Technologies-compatible equipment. We use Rotobrush and Nikro agitation tools sized to your duct diameter, with Abatement Technologies HEPA-AIRE portable units as supplementary negative-air capture when the job requires it. The photo comes first. The invoice comes second.
- 5
Post-clean verification and documentation. Every duct run is photographed after cleaning. We measure final static pressure and airflow at registers, compare to pre-clean readings, and deliver the full photo record as a standard job deliverable.
- 6
Written guarantee. The 365-Day Done Right Promise is documented on the invoice before we leave. If the work is not right, we make it right.
BeforeAfterWhat Abatement Technologies Air Duct Cleaning Costs in Sandy Springs
| Service | Typical Range | What Moves the Price |
|---|---|---|
| Abatement Technologies residential whole-system cleaning (single HVAC) | $450-$650 | Number of duct runs, presence of flex duct in attic, accessibility of main trunk |
| Abatement Technologies system with HEPA-AIRE SAH2 bypass cleaning | $580-$890 | Condition of bypass damper, need for actuator service, HEPA bank replacement |
| Abatement Technologies portable unit deep clean (PREDATOR/PAS2400) | $220-$380 | Filter replacement needs, hose condition, motor amp draw testing |
| Commercial CAP600-UV service | $340-$520 | Lamp replacement count, reflective interior condition, ceiling access difficulty |
These are whole-system prices, not per-vent teasers. The price we write is the price you pay. Bring us a competitor’s written estimate and we’ll deliver a free second opinion in writing. Call (678) 904-9744 for an exact quote - estimates are free.
Why Sandy Springs Homeowners Call CleanRun Air Duct Cleaning Sandy Springs for Abatement Technologies Work
We are an independent Abatement Technologies service provider, not a factory-authorized dealer, which means we service the equipment without the warranty restrictions that factory networks sometimes impose on independent duct cleaning. Our technicians carry Rotobrush, Nikro, and Abatement Technologies equipment on every truck, and when your system integrates with Lennox, Trane, or Carrier components, we don’t need to reschedule for a different crew.
Haven Standard Clause 3, Verified Crews, means every technician is background-checked, uniformed, and identified by name before arrival. The 365-Day Done Right Promise is backed in writing on every job, not stated in marketing copy and forgotten. Since 2013, we’ve served 52,000+ homes with a written price before work started and a documented photo record when the crew left.
FAQs
No, provided the work is performed by a qualified technician using manufacturer-compatible procedures and parts. As an independent Abatement Technologies service provider, we document our methods and equipment specifications in your job record so warranty claims remain valid. We do not use aftermarket filters or components that conflict with Abatement Technologies specifications. Call (678) 904-9744 if you need documentation for a warranty submission.
Replacement becomes the better option when the blower motor draws more than 15% over rated amperage after filter and duct cleaning, or when the HEPA media shows structural breakdown visible in our borescope inspection. We show you the photo and the amp reading before recommending either path. Call (678) 904-9744 for an inspection and written assessment.
We stock common Abatement Technologies consumables and can source OEM components for units up to approximately 12 years old. For discontinued series, we use Guardsman-rated or Honeywell-compatible equivalents that meet the original performance specifications, with the substitution noted in writing on your invoice. Call (678) 904-9744 with your model and serial number for availability.
Every 3-5 years for standard residential systems, and every 2-3 years if your home is near the I-285 corridor where construction dust and pollen loads run higher. Sandy Springs’ mixed hardwood-pine pollen season extends from late February through May, and homes with mature oak canopy tend to accumulate more debris in return ducts. We date-stamp your photo record so you have a baseline for the next decision. Call (678) 904-9744 to schedule or review your last cleaning date.
The $79-$149 offers typically cover a visual inspection and shop-vac noise at one or two registers, not a full-system cleaning with negative-pressure extraction and photo documentation. We quote whole-system work with a written scope because Haven Standard Clause 1 requires it. The photo record proves the difference. Call (678) 904-9744 for a written quote you can compare line by line.
Written by Tomas Reyes, Owner, CleanRun Air Duct Cleaning Sandy Springs at CleanRun Air Duct Cleaning Sandy Springs, serving Sandy Springs and nearby areas.