Whole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Fast, Reliable Duct Repair & Sealing Across College Park
Duct repair and sealing in College Park, GA typically costs $280-$650 for most residential jobs, with full-system resealing on older homes running toward the higher end. We dispatch crews to College Park from our Atlanta office, and most appointments are scheduled within a few business days. Call (678) 904-9744 for a written estimate before any work begins.
We’ve been working in College Park since 2013, and the housing stock here tells a consistent story: original galvanized steel trunks from the postwar decades, flex-duct additions from the 1970s and 80s, and duct tape that’s dried to a brittle yellow strip hanging off metal seams. The homes north of Camp Creek Parkway, directly under the Hartsfield-Jackson final-approach corridors, carry an additional signature - a gray-black carbon film inside the supply plenum that homeowners regularly mistake for mold. Our Duct Repair & Sealing team documents everything with before-and-after photos, so you see what we see before agreeing to any scope of work.
Why CleanRun Air Duct Cleaning Sandy Springs Is College Park’s Preferred Duct Repair & Sealing Company
College Park homeowners have left us reviews mentioning the same thing repeatedly: they chose us because we showed them photos of their own ductwork before talking price, and because the written estimate they received matched the final invoice. Our 365-Day Done Right Promise applies to every job in College Park, backed in writing under Haven Standard Clause 1 - not a verbal assurance that disappears with the crew.
We’re familiar with the specific failure patterns in College Park’s older neighborhoods. The 1940s-60s ranch and bungalow stock near Virginia Avenue and the streets west of Main Street carry original duct systems that have been patched multiple times. Our technicians are background-checked, uniformed, and identified by name before arrival - Haven Standard Clause 3: Verified Crews. Dispatch and scheduling are coordinated from our Atlanta office, with crews serving College Park locally.
Every job concludes with a Documented Photo Record of every duct run, delivered as a standard deliverable. Since 2013, we’ve served 52,000+ homes with this same protocol: written price first, photographic evidence second, work third.
Our Duct Repair & Sealing Services in College Park

Duct Sealing
Most College Park homes we inspect have supply leaks at the plenum connections and return gaps where the trunk meets the air handler. In the humid subtropical climate here, those gaps pull unconditioned crawlspace air directly into your system - air that carries Georgia’s persistent moisture and, in airport-proximate neighborhoods, ultrafine particulates from jet exhaust. We seal with mastic sealant (a thick, fiber-reinforced paste that remains flexible) and mechanical fasteners, not duct tape. Duct tape fails in attics; mastic doesn’t. A typical duct sealing job in College Park runs $320-$580 for a single-system home, depending on accessibility and the linear feet of joint work required.

Flex Duct Repair
Flex duct installed in College Park attics during the 1970s and 80s has often sagged into low loops that collect condensate during the long cooling season. Georgia’s humidity - combined with College Park’s low elevation and proximity to Flint River bottomlands - creates conditions where those low spots become mold colonization zones. Our field vignette: our techs were running a routine clean on a 1958 ranch north of Camp Creek Parkway when the camera inspection showed three crushed flex-duct runs in the attic and a black film coating the supply plenum interior that the homeowner had assumed was mold. We walk-tested every run, ran mastic sealant on the disconnected joints and taped collars, and sealed the plenum with a proper sealed boot after verifying it was carbon soot, not microbial growth. Two days later the system was holding static pressure like it hadn’t in years. Flex duct repair in College Park typically runs $180-$340 per run, with full attic replacement of deteriorated flex at $85-$140 per linear foot.

Metal Duct Repair
The galvanized steel trunks in College Park’s original postwar housing - many still in service near the historic downtown grid and along Roosevelt Highway - develop rust-through at the bottom of horizontal runs where condensate pools. We cut out deteriorated sections, fabricate replacement segments, and seal with mastic and proper mechanical connections. Metal repair requires more labor than flex work, and College Park’s older homes often need custom fabrication that off-the-shelf fittings won’t accommodate. Typical metal duct repair in College Park runs $280-$520 per section, with full trunk replacement on larger systems reaching $800-$1,400.

Duct Insulation
Uninsulated or degraded duct insulation in College Park attics and crawlspaces creates two problems: thermal loss that drives up cooling bills, and surface condensation that saturates surrounding materials. In the neighborhoods south of I-285 near the airport, we’ve found insulation compressed by decades of maintenance traffic, chewed by rodents, or simply disintegrated from heat exposure. We install new insulation with proper vapor barriers, sealed at all seams. Duct insulation work in College Park typically runs $2.80-$4.50 per linear foot for standard R-6 to R-8 flex wrap, with rigid board insulation on plenums at $180-$320 per surface.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterTrusted Brands We Service in College Park
Our equipment roster includes Rotobrush for mechanical agitation in residential duct runs, Nikro for negative-pressure extraction systems, and Abatement Technologies for HEPA filtration during disturbance work. We don’t claim these tools perform beyond manufacturer specifications - we name them so you can look them up independently and verify what you’re paying for. For sealing work, we specify Guardsman-brand mastic compounds, selected for flexibility retention in the temperature swings of Georgia attics. Parts and materials are stocked for College Park appointments, so most sealing and repair jobs are completed in a single visit once the scope is agreed.
Common Duct Repair & Sealing Problems We See in College Park Homes

- Dried duct tape on original galvanized steel trunks. The adhesive has crystallized and the tape hangs loose, leaving open joints that pull humidity-laden crawlspace air directly into your supply stream. We find this in virtually every pre-1970 College Park home we inspect, particularly in the neighborhoods between Main Street and the airport perimeter.
- Sagged flex-duct runs creating condensate traps. Early flex installations in College Park attics have settled over decades into low spots where Georgia’s cooling-season humidity condenses on the duct exterior and pools in the liner. These become mold colonization zones that blow spores through the system every time the fan cycles.
- Jet-exhaust carbon film mistaken for mold. Technicians working the neighborhoods directly under the Hartsfield-Jackson final-approach corridors - like the streets north of Camp Creek Parkway - routinely find a grayish-black carbon film coating supply plenum interiors that’s distinct from typical household dust. Homeowners see it and assume mold; the wrong fix (biocide spray) gets applied instead of source removal with negative pressure and HEPA filtration followed by proper sealing.
- Disconnected collars at plenum take-offs. The vibration from College Park’s frequent low-altitude aircraft overflights, combined with decades of thermal cycling, loosens the sheet-metal screws and tape at duct connections. We find supply boots hanging open by a few inches, dumping conditioned air into attics and crawlspaces.
Pricing for Duct Repair & Sealing in College Park, GA
Here’s what duct repair and sealing costs in College Park’s market:
| Service | Typical Range |
|---|---|
| Duct sealing (mastic, single system) | $320-$580 |
| Flex duct repair (per run) | $180-$340 |
| Flex duct replacement (per linear foot) | $85-$140 |
| Metal duct repair (per section) | $280-$520 |
| Full metal trunk replacement | $800-$1,400 |
| Duct insulation (per linear foot) | $2.80-$4.50 |
| Plenum surface insulation | $180-$320 per surface |
These are whole-system ranges for College Park - not per-vent teaser prices that balloon once the truck arrives. Every estimate is delivered in writing before work starts, with no exceptions. Haven Standard Clause 1. Factors that move a job toward the higher end: multiple attic access points, extensive rust-through requiring custom fabrication, or systems with multiple layers of previous repair that must be removed before proper sealing. Call (678) 904-9744 for an exact quote - estimates are free, and we provide a Free Second Opinion on any competitor’s written estimate.
We Also Serve Cities Near College Park

Our crews work throughout the metro area, and we regularly schedule Duct Repair & Sealing in College Park alongside appointments in Sandy Springs, Roswell, Norcross, and Smyrna. The same written-price-first protocol and Documented Photo Record apply in every city we serve.
Serving College Park, GA - Our Local Coverage Area
We’re based in the College Park area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Duct Repair & Sealing in College Park

It’s often jet-exhaust carbon soot, not mold, if you live under the Hartsfield-Jackson approach corridors north of Camp Creek Parkway. The particulate load from the world’s busiest airport creates a gray-black film that coats plenum interiors and looks identical to mold on casual inspection. We verify with camera inspection and, when indicated, lab sampling before recommending any treatment. Source removal with negative-pressure extraction and HEPA filtration, followed by proper sealing, is the correct response - not biocide spray on non-organic soot. Call (678) 904-9744 and we’ll show you what you’re actually looking at.
The original duct tape has likely dried and lost all adhesive properties; it cannot be “resealed.” We remove the failed tape entirely, clean the joint surfaces, and apply mastic sealant with mechanical fasteners. This is standard protocol for College Park’s postwar housing stock. The repair is permanent, and we photograph every joint before and after. Written price before work starts, every time.
College Park’s combination of low elevation, Flint River bottomland proximity, and airport-proximate heat-island effect creates persistently higher crawlspace and attic humidity than you’ll find in northern suburbs like Roswell or Alpharetta. That moisture accelerates duct tape adhesive failure, metal trunk rust-through, and mold colonization in flex-duct low spots. The sealing work we do here is specifically designed to withstand these conditions - mastic, not tape; sealed boots, not loose collars.
Yes, if the flex liner is intact and the insulation isn’t saturated. We support the run with proper hangers to eliminate low spots, seal any disconnected collars with mastic, and replace only the damaged sections. If the liner is torn or the insulation is mold-compromised, we recommend replacement of that specific run. We walk-test every run and show you the camera footage before recommending either approach. Call (678) 904-9744 for a written scope and price.
Hartsfield-Jackson’s operations generate ultrafine particulates and carbon soot that standard residential filters aren’t designed to capture efficiently. Combine that with Atlanta’s extreme spring pollen events - among the highest oak and pine counts in the U.S. - and your filter loads faster than in airport-distant neighborhoods. The real fix isn’t a better filter alone; it’s sealing the duct system so it’s not pulling unfiltered attic and crawlspace air through gaps in the trunk line. A sealed system with proper return design reduces filter load and improves what actually reaches your living space.
Ready to see what’s inside your ductwork? Call (678) 904-9744 to schedule a free estimate. We’ll deliver a written price before any work starts, document every run with before-and-after photos, and back the result with our 365-Day Done Right Promise. Tomas Reyes built CleanRun on the principle that homeowners deserve to see the evidence before making a decision - and that principle hasn’t changed since our first job in 2013.
Written by Tomas Reyes, Owner at CleanRun Duct Repair & Cleaning, serving College Park and the greater Atlanta area since 2013.




Before
After
Before
After